Mitchell
Jennings
Configuring local user accounts
I configured RouterA with a local user account and authentication for both console and remote access.
You can use Telnet access from RouterB to RouterA using the following command:
You can use Telnet access from RouterB to RouterA using the following command:
telnet 192.168.1.1
Use the following credentials:
username: admin
password: securep
This is what it'll look like in the CLI:
RouterB>telnet 192.168.1.1
Trying 192.168.1.1 ...Open
User Access Verification
Username: admin
Password:
RouterA#
